BFXWS - 724222-COMP A

  • MSDS: BFXWS
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: 724222-COMP A
  • National Stock Number: 8010-00-935-7080
Product Identification

Product ID:724222-COMP A
MSDS Date:01/01/1985
FSC:8010
NIIN:00-935-7080
Kit Part:Y
MSDS Number: BFXWS

Responsible Party
PRATT & LAMBERT
16116 E 13TH ST
WICHITA, KS 67201
US

Cage: PRATT

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

2-EPOXYETHANOL

RTECS: KP5685000

Fraction By Weight: 15%

ACGIH TLV: 5 PPM


STRONTIUM CHROMATE

RTECS: WK8600000

Fraction By Weight: 25%

ACGIH TLV: 3.00 9/KG


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 15%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 7.5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <0.5%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:IRRIT OF NOSE,THROAT,EYES & POSS DIZZINESS &
NAUSEA.SPRAY MIST CONTN LEAD.

First Aid

First Aid:INHAL:REMOVE FR EXPOSR & PROVID FRESH AIR.SPLASH EYES-FLUSH
IMMED W/LG AMTS OF WATER FOR 15 MIN.SPLASH SKIN:REMOV CONTAM
CLOTHING & WASH ALL AFFECT AREA W/WATR.INGEST:DO NOT INDUC
VOMITING.CONSULT A D R. IMMED IN ALL CASES.

Fire Fighting

Flash Point:44F, 6C
Extinguishing Media:CLASS B EXISTING,CARBON DIOXIDE, DRY CHEM OR
ALCOHOL FOAM
Fire Fighting Procedures:SELF CONTAINED BREATH APPARAT, WATER MAY BE
INEFECTIVE.
Unusual Fire/Explosion Hazard:KEEP CONTNRS TIGHTLY CLOS.ISOLAT FR
HEAT,ELECTR EQPMT SPARKS & OPN FLAME.DO NOT APPLY TO VRY HOT SUR

Accidental Release

Spill Release Procedures:REMOV ALL SOURCES OF IGNIT (FLAMES,HOT
SURFACES,ELECTRICAL,STATIC OR FRICTIONAL SPARKS.) VENTILAT AREA &
AVOID BREATHING.VAPORS.REMOV W.INERT ABSORB & NON-SPARKING
TOOLS.STEPS MUST BE TAKN TO PREVNT C ONTAN OF GROUND WART OR
STREAM.

Handling

Handling and Storage Precautions:DO NOT STORE ABOV 120F.STORE LG
QUANTITIES IN COMPLIA W/OSHA 1910.106.CONTNRS SHLD BE GROUNDED &
BONDED TO THE RECEIVING CONTNR.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTAINER. DO NOT USE
UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ & FULLY UNDERSTOOD BY
THE USED.

Exposure Controls

Respiratory Protection:NIOSH APPRVD MECH RESPIRAT TO REVMO OVERSPRAY
WHN SPARAYING IN OUTDR
Ventilation:PROVID GEN DILUT/LOC EXHAUST VENT TO KP CONCENT BELOW
ACEPTL
Protective Gloves:SOLVENT,IMPERME
Eye Protection:SAFETY EXEWR
Other Protective Equipment:PROTECTV EQPMT TO PRVNT SKN CONTCT.SE
OSHA,29 CFR 1910.1025.
Supplemental Safety and Health
SEE P/N B 8010009357080.KEY1:J1.

Chemical Properties

Boiling Pt:B.P. Text:223-277F
Vapor Density:>AIR
Evaporation Rate & Reference:Percent Volatiles by Volume:63

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/PONG ACIDS OR AKALINE MATERIALS.
Stability Condition to Avoid:FIRES, HEAT & HOT SURFACES.
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOKE & OXIDES OF
CARBON & LEAD.
Conditions to Avoid Polymerization:DO NOT AVD DRIERS OR REACTIV CHEM
W/0 TECHN SUPERVISION.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORD W/LOCAL,STATE & FEDERAL
REGULATIONS.INCINERATIN EPA APPRVD FACILITY.DO NOT INCINERAT CLOSED
CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.